Warning !! Following information are for educational purpose only,
You are using the software at your own risk !!
We hold no responsibility for any damage.
==============================================
USB Cable A Male To A Male update cable required to preform this update.
Download software and firmware
Download Phoenix V4
www.hkbtech.co.uk/evpad/phoenixusb.msi
- Download Evpad3s Firmware
==============================================
How to prepare for update:
- Install phoenix V4 installer
- Open Phoenixusb Pro software
- Choose image file i.e miniH6-evpad-3s-20181212-v01.img
- press start on Phoenixusb software
-Push pin into and do not release reset hole ( see photo )
-Plug in USB Male-Male update cable , wait 30 sec
-Phoenixusb software will show " see device 1 - serial number "
Firmware Flashing time appox 5 mins
www.hkbtech.co.uk